NEGATE / DOUBLE DIFFERENCE / WITH SLANT

By LADY TIA

HI ALL.... LADY TIA HERE WITH AN ADDITION TO SCARLET'S ORIGINAL.. "NEGATE DOUBLE DIFFERENCE TUTE"

NEGATE DOUBLE DIFFERENCE TUTE by SCARLET

WITH THIS TUTE WE WILL BE USING SCARLETS BASIC FORMULA...BUT WE WILL BE ADDING A SLANT (ROTATE) OR TWO.

BASIC FORMULA + OPPTIONAL SLANT(ROTATE) INSTRUCTIONS

STEP 1 =

ENHANCE/NEGATE

STEP2=

GO TO COMPOSITE..ENTER PARAMETER NUMBERS OF +(plus)1/2WIDTH + (10 to 30) PIXELS +0 ...GRAVITY=CENTER...COMPOSITE=DIFFERENT... (WITH AN OPPTIONAL +(plus) OR -(minus) ROTATE)

STEP 3=

GO TO COMPOSITE...PARAMETERS= -(minus)1/2 WIDTH +(10 to 30) PIXELS+0...GRAVITY=EAST...COMPOSITE=DIFFERENT...(WITH AN OPPTIONAL +(plus) OR -(mnus) ROTATE)

>>>>>>>>>LET ME SHOW YOU<<<<<<<<<<

USING THIS ORIGINAL GRAPHIC ** TAKE NOTE OF THE WIDTH**

***WIDTH=350***

STEP 1 ENHANCE NEGATE

STEP 2 USING 1/2 THE WIDTH OF 350=175 ..I WILL ADD 20 PIXELS ...WHICH EQUALS 195..... THIS IS THE NUMBER I WILL BE USING IN STEP 2 AND 3 SO FOR PARAMETER NUMBERS ENTER +195+0 GRAVITY = CENTER COMPOSITE=DIFFERENCE
***NOTE ...THAT THIS PARTIAL GRAPHIC SHOWS UP ON THE RIGHT SIDE OF YOUR IMAGE.

"IF" THIS IS THE SIDE WHERE YOU WANT YOUR SLANT TO BE... THEN DO THE XACT SAME AS ABOVE....BUT SCROLL DOWN TO ROTATE...ENTER EITHER A +NUMBER OR A - NUMBER +++USING A +30 WILL ROTATE YOUR GRAPHIC TO THE RIGHT AND SHOW THE BOTTOM LEFT CORNER (SW) +++USING A -30 WILL ROTATE YOUR GRAPIC TO THE LEFT AND SHOW THE TOP LEFT CORNER (NW)

EXAMPLE ...ADDING -30 ROTATE

EXAMPLE....ADDING +30 ROTATE

STEP 3 ...**NOTE...THIS PARTIAL GRAPHIC WILL SHOW UP ON THE LEFT SIDE OF YOUR IMAGE.......
SINCE I ADDED THE ROTATION IN STEP 2....I WILL NOT ADD IT TO STEP 3
SO GO TO COMPOSIT PARAMETER IS -195+0 GRAVITY = EAST COMPOSITE=DIFFERENT NO ROTATION

"IF" THIS IS "NOT" THE SIDE YOU WANT YOUR SLANT ON.....THEN JUST LEAVE THE ROTATE OFF "STEP 2"
YOU WILL EITHER ADD A ROTATION TO STEP 2 OR STEP 3

IF YOU ADD ROATATION TO STEP 2...DO NOT ADD THE ROTATION TO STEP 3

IF YOU DO NOT ADD THE ROTATION TO STEP 2....THEN ADD THE ROTATION TO
STEP 3

IF YOU PREFER YOUR SLANT ON THE LEFT SIDE OF YOUR IMAGE...ADD YOUR ROTATION TO STEP 3

STEP 1 ENHANCE/NEGATE
STEP 2....+195+0 GRAVITY=CENTER COMPOSITE=DIFFERENCE (NO ROTATION)

STEP3 -195+0 GRAVITY="EAST" COMPOSITE=DIFFERENCE AND ADD ROTATION OF +(PLUS)NUMBER OR -(MINUS) NUMBER.

EXAMPLE USING ROTATE +30

EXAMPLE USING -30

****NOTE... IF YOU USE A +(PLUS) ROTATE NUMBER IN THIS STEP...THE TOP RIGHT PART OF YOUR GRAPHIC WILL SHOW ..... IF YOU USE A -(MINUS) ROTATE NUMBER IN THIS STEP...THE BOTTOM RIGHT (SE)PART OF YOUR GRAPHIC WILL SHOW.

NOW IF YOU WANT TO REALLY GO EXTREME ....YOU CAN ADD A ROTATION TO BOTH SIDES

USING BASIC FORMULA ADDING A +30 ROTATION TO STEP 2 AND ADDING A -30 ROTATION TO STEP 3

THAT'S IT.....3 BASIC STEPS WITH AN OPPTIONAL SLANT ON THE LEFT plus or minus.....OR THE RIGHT plus or minus......OR BOTH plus or minus

BE CREATIVE...SEVERAL OPTIONS WITH ONE BASIC FORMULA.....WHY NOT TRY THEM ALL ??? ;-)

BE SURE TO ANNOTATE AND USE ANY FINISHING TOUCH TECHNIQUES YOU PREFER.

ie COMP/DECOR....ENH/BRIGHT ect.

ABOVE ALL..... HAVE FUN CREATING